When you get the Terminator, you can throw oscilloscopes out!
Electric Tester for Car Maintenance Engineers
Watch the pulse with the LED : The effective activation of 9 LEDs displays all automotive signals.
Simple test for checking all circuits : Powerful logic probe can check for open circuits, short circuits, and other poor electrical connections.
Voltage, frequency, or duty modes : You can toggle between the voltage, frequency, or duty modes at the push of a button while the Terminator is in use.
Safe for the most sensitive components : The state-of-the-art technology used in the Terminator lets you work safely with all sensors and car ECUs.
No more power cables : The Terminator is cordless and battery operated. You will no longer have to change the polarity of the ground clips, or drag around a long power cord.
You can find the target in the dark : The built-in flashlight allows you to easily `search and find the target in an unlit area.
Easy to use in narrow spaces : An extension cord has been provided so you can easily use the Terminator in narrow spaces.
1. Starting & Charging System
- Starter Motor
- Test Battery Load
- Alternator Capacitor
- Test Charging Signal
2. Electric Relay & Actuator
- Window motor
- Wind Shield wiper Motor
- Door Locker
- Trunk Locker
- Fuel Pump Motor
- Stepping Motor
- ISA(Idle Speed Actuator)
- TR(Power Transistor)
- Fuel Injector
- Main Control Relay
- Power & Ground of Sensors
- MAP Sensors
- O2 Sensors
- Rpm Sensors
- Air Flow Sensors
- Crank Angle Sensors
- Vehicle Speed Sensors
- NO. 1 TDC Sensor
- Water Temperature Switch
- Pulse Generator(A/T)
- Idle Switch
- Abs-Wheel Speed Sensor
- Throttle Position Sensor
- Cam Posiotion Sensor
- Noise Filter
- Air Temperature Sensor
- Barometric Pressure Sensor
- Inhibitor Switch(A/T)
- Water Temperature Sensor
- Solenoid Valve(A/T)
- Electric Hon
- Electric Fan Switch
- Taco Meter
Won't damage sensitive electronic components.
Safe for automotive computers.
- Product Name: Multi Logic Probe "Terminator"
- Model No.: T-7205J
- Controller Type: Digital/ LED Micom
- CPU: 8Bit Micom, 10 Bit A/D Converter; 4.0 MHz Clock Speed
- Display: 3 Digit FND; 9 Color LED
- Voltage Range : DC -45 V ~ +50 V; 0 ~ 20 kHz
- Electrical Properties: Standby Current: 49±5 uA
Electrical Properties: Normal Current: 14.78±2 mA
Electrical Properties: Voltage Test Current: 21.5±2 mA
Electrical Properties: Frequency Test Current: 22±2 mA
Electrical Properties: Illumination Current: 33±2 mA
- Effective Temperature Range : 0 °C ~ 50 °C
- Power Requirements: DC 3V, LR03 (AAA 1.5V Alkaline) 2EA
- Illumination: White LED
- Size: 201x34x25 mm (Including Probe Pin)
- Weight: 70 g
- Included Accessories: Ground Clip; Extension Probe
- Temperature : 30±2°C
- Atmospheric Pressure : 575 to 800mmHg
- Relative Humidity : 30 to 60%
- Power Requirements: DC4.5V Battery (LR44 1.5Vx3) 2x3
- Temperature Range
- Operating : 0°C to + 55°C
- Storage : -40°C + 60°C
- Illumination : LED
- Size : 201x34x25mm(Including Probe Pin)
- Weight : 70g
- Accessories : Ground Clip
Test Lead Assembly